Once you have gathered genuine Saab parts, you may be wondering how to proceed with radiator replacement. These step by step instructions will make it a cake walk.
If you are worried about or do not know how to replace the radiator of your car, this guide will help you and let you do this task in an easy and perfect way. Before that, make sure you have bought the radiator from a genuine Saab parts store. Let’s start the guide.
1. Prioritize Safety
Safety should be your preference before you replace the radiator of your Saab car. There are several wires with electrical connections. You can start by disconnecting them. The next step should be to remove the battery. Moreover, the park the vehicle at a safe but mounted place.
2. Inspect the System
It is advised that when you replace the radiator of your Saab car, it is pertinent to inspect the radiator and the components around it. Sometimes, the thermostat of the engine is also damaged due to release of the coolant. Therefore, you will also have to replace the thermostat along with the radiator.
3. Drain the Radiator
The next step in the process is to drain the radiator. It should be noted that there are two ways to drain the radiator. First, you can remove the radiator cap either way. When the cap is removed, the petcock valve should be removed. Second option is to remove the bottom radiator hose and drain the coolant.
4. Disconnect It
When the coolant has been drained, you should disconnect the radiator but do not remove it. It includes removal of hoses, bolts, clamps, and other parts such upper radiator hose, lower radiator hose, cooling fan connector, AC condenser and other components in the radiator.
5. Remove the Old Radiator
The removal of the bolts, clamps and relevant parts will make it easy for you to take the radiator out of its place. In most of the vehicles, the radiator is removed by lifting it up. But in some vehicles, it is removed underneath. Whatever the method is, you should know it in advance.
6. Mount the New One
When you are done with removing the old radiator, it is time to mount the new one. But before doing so, make sure you have got the right radiator. Using a wrong radiator will affect the vehicle and its performance. After mounting the radiator, tighten the bots and hoses.
7. Add the Coolant
Now you will be adding coolant to the radiator. However, it should be ensured that all valves and hoses are closed otherwise it will start leaking. Now you can add the coolant. When done with this, you need to check oil and transmission fluid levels as these are lost during this process, in some cases.
8. Bleed the Air from the Cooling System
Lastly, it is suggested that you should bleed the air from the cooling system. The reason is that the presence of air in the cooling system causes overheating and performance issues. For bleeding, you will need to follow the manual or seek the help of a mechanic.
Conclusion
Replacing the radiator of your car is easy and simple if you follow the steps given above. With this method, you will be able to replace the radiator without any issues. We recommend getting genuine Saab parts as they last longer and perform better.
AutoPartsZ 